Steve Weston
Member
Coming back to film. Just purchased a 501CM with 80mm Planar. Looking forward to getting to grips with it. Found this Forum through APUG and looks a good place to learn.
DPR Forum
Welcome to the Friendly Aisles!
DPRF is a spin-off of dpreview. We are a photography forum with people from all over the world freely sharing their knowledge and love of photography. Everybody is welcome, from beginners to the experienced professional. From smartphone to Medium Format.
DPRF is a community for everybody, every brand and every sensor format. Digital and film.
Enjoy this modern, easy to use software. Look also at our Reviews & Gallery!
Hi From the UK
- Thread starter Steve Weston
- Start date
polypal
Well-Known Member
Welcome Steve and congratulations on your 501CM with Planar lens.
In case you do not have a manual for your camera you can download the manual FOC from www.hasselblad.se
To get acces to manuals you have to register first.
Please note:
For some strange reason the there is no 501 CM manual available from Hasselblad.
Instead download the 503CW manual and disgard the information about TTL flash and the winder.
In case you do not have a manual for your camera you can download the manual FOC from www.hasselblad.se
To get acces to manuals you have to register first.
Please note:
For some strange reason the there is no 501 CM manual available from Hasselblad.
Instead download the 503CW manual and disgard the information about TTL flash and the winder.
Steve Weston
Member
Hi Polypal, Thanks for the link. I actually managed to download one from here, http://www.hasselbladhistorical.eu/HW/HWVSys.aspx. I am really enjoying the simplicity of not having to scroll through menu's.
polypal
Well-Known Member
Anti spam
You may have wondered why your second post did not appear immediately after upload.
The forums software does not allow posts from newly registered users containing links.
This is to prevent spam reaching the forum.
I approved your post. It is now in the public section of the forum.
You may have wondered why your second post did not appear immediately after upload.
The forums software does not allow posts from newly registered users containing links.
This is to prevent spam reaching the forum.
I approved your post. It is now in the public section of the forum.