What's new
DPR Forum

Welcome to the Friendly Aisles!
DPRF is a spin-off of dpreview. We are a photography forum with people from all over the world freely sharing their knowledge and love of photography. Everybody is welcome, from beginners to the experienced professional. From smartphone to Medium Format.

DPRF is a community for everybody, every brand and every sensor format. Digital and film.
Enjoy this modern, easy to use software. Look also at our Reviews & Gallery!

Lens Coating marksimportant or not to image

G

grumpoid

Well-Known Member
Hiya all,

On the subject of a lens having a 'coating' mark on the front optic, many photographers insist they have no affect on image quality at all..what do you guys think? any evidence to the contrary? any respected pro's who think otherwise? any websites with info on the subject?

cheers Steve.
 
Hi Steve, all I can say is that in my days as a pro-tog I occasionally bought s/h fast Zeiss lenses with a coating mark on the front element as a means of affording ownership. Even in extreme lighting conditions, I do not recall any of the thousands of slides betraying a problem except for one occasion with a 15mm where I got some unusual flare when shooting with strong directional light entering at near right angle to the part of the element with the coating mark. Nowadays, this would have been a breeze to correct in software if producing prints. As most of my work was gymnastics photography, usual lighting conditions were subdued indoor and of course, no flash! Lenses were always wide open - no problems. Even when shooting at events with TV lights, no problems. Mind you, I was often shooting with GAF500, so spotting any problem through the golf-ball grain was difficult! Those were the days...

I'm sure that the likelihood of problems arising is entirely contingent upon the extent of coating marks and the extremes of light travelling through the affected part of the lens. I reckon from experience, in over 95% of cases, no one would ever spot a problem in the resultant image. If you sell lenses, the drop in perceived value is a bummer. If like me you buy lenses primarily to use, they can be a real bargain!

Cheers,

Graham
 
Hi Steve I have an Elmarit-R 2.8/90 Mk I which has a 1mm long and 0.5mm wide scratch on the front element, 9mm out of axis. I believe the CONTRAST drops a good bit and sharpness stays the same, i.e. is not affected.
But on slide film there are a few/ some "dirty" grains spread all around. dye clouds like "dust".
Hope that helps, Rainer
 
You must log in or register to reply here.
Back
Top