80mm f28 Scheider and 14 converter

[Cwoodhou]

I know the CZ 80 f2.8 is not compatible with the 1.4 converter, but does anyone know if the Schneider version is OK?

 

[sonovo]

I have the 80/2 Xenotar, it works fine with the 1.4x Longar.

Thor

 

[bmr]

I'm 99% sure the 1.4AF converter works with the 80/2.8AF Xenotar. If I remember correctly, Rollei, not very long ago, was throwing in for free, a 1.4AF, when you bought the basic AF kit (body & AF Xenotar). I'm not sure if you are asking about the manual versions or the AF type---there may be a slight difference. Give Rollei a call to verify if nobody else answers that has the combo you asking about.

 

[Cwoodhou]

It was the manual version I was interested in. I sent an email to Rollei, but have had no answer.

 

[Cwoodhou]

Rollei gmbh confirmed that the 1.4 converter is NOT compatible with the Xenotar 80 f2.8.

 

[Cwoodhou]

Apologies all, I misread the email from Rollei GMBH. I skipped a line when reading their resonse. They were referring to the CZ lens. The 80 f2.8 Schneider is OK with the 1.4x converter.

 

[Cwoodhou]

I finally tracked down a used 80mm Schneider and a 1.4x converter. They are NOT entirely compatible. The rear element of the lens fouls with the converter just before you get to the infinity mark on the lens. I guess if you are doing portraits or using a hyperfocal distance then you are OK, but it is pretty poor show that Rollei don't know their own products better.

 

[dkhaw]

Chris - this is surprising! Have you tried the x1.4 with a 180mm yet?

Regards Daniel

 

[Cwoodhou]

I only have the 60 / 80 and 150 Schneiders. I'm still saving for the 180!

 

[sonovo]

I chose the 150/4 over the 180/2.8, mainly because of size and weight. I do have the 80/2, and am planning on getting a 40/3.5.

I haven't heard much about the 60, it's a focal length I don't have much experience with. How do you like it, do you find it useful, and what is it best at? Is it as nice as the other Schneiders?

Thor